Fuse Blocks & Holder
Blade Fuses Holder
Blade fuse holders are wire-in, wire-out/line and load fuse holders. They are essentially a self-enclosed wire harness and offer a wide range of application flexibility. This type of fuse holder can allow easy fuse replacement or make fuses more difficult to access, depending on the designer’s objective and where they are installed.
Blade Fuses Holder Products
QSC-1 Auto Fuse Holder for Standard Blade Fuse
The auto fuse holder's length of the 16 AWG(6 inches) wire and fits standard(APR/ATC/ATO/ATS) fuses with 12/24V DC electrical systems.
QSA-2 Micro 2 Fuse TAP 20 Amp Fuse Holder
The 20 Amp fuse holder's length of the 16 AWG(6 inches) wire and fits Micro 2 (ATR/APT) fuses with 12/24V DC electrical systems.
QS-03
QS-03 atc fuse holder rating is 10A 32VDC
QS-02
QS-02 atc fuse box size is ATC blade fuse
F107-C
F107-C mini blade fuse holder suitable size is mini blade fuse
F108-C
F108-C inline atc fuse holder sutiable fuse size is ATC blade fuse
F109-C
F109-C blade fuse holder block suitable fuse size is ATC blade fuse
F110-C
F110-C automotive blade fuse holder at 1 minute dielectric strength 3000VAC 50Hz
F111-C
F111-C 10amp inline fuse holders are suitable for protection against overloads and short circuits.
F112-C
F112-C inline car fuse holder max contact resistance is 35mΩ
F113-C
F113-C blade fuse holder suitable fuse size is MAXI blade fuse
F114-C Waterproof 12 AWG Wires Inline Blade Fuse Holder
The blade fuse holder's total length of the 12 AWG wire is 30cm (12 inches). It fits ATC/ATO size fuses and will come with 30A and 40A fuses.
F115-C
F115-C inline auto fuse holder rating is 10A 32VDC
F117-C 12 AWG ATC/ATO Waterproof Fuse Holder
The waterproof fuse holder's total length of the 12 AWG wire is 15cm (5.91"). It fits 1A - 40A ATC/ATO inline fuse for DC 12V, 24V.
Engineering Consulting & Custom Quotes
Submit drawings or specs for Blade Fuses Holder. Receive engineering feedback and quotes within 24 hours.