MWK+WD100-1 Milwaukee M18 Battery Adapter for Car Jump Starter | 2FT 8AWG or 6FT 10AWG Jumper Cable
P/N: MWK+WD100-1
This Milwaukee M18 battery to car jump starter adapter features high-conductivity tinned copper wiring and fully insulated safety clamps to provide emergency vehicle power.
Available in 2FT (8AWG) for maximum cranking power and 6FT (10AWG) for extended reach, this heavy-duty silicone cable kit offers a reliable, all-weather solution for jumping dead batteries or powering 12V outdoor gear.
Category :
Battery Holder & Adapters
MWK+WD100-1 Milwaukee M18 Battery Adapter with Jumper Cables Details
- Universal Milwaukee Compatibility
This Milwaukee M18 battery adapter is precision-engineered to fit the entire M18 lithium-ion series, including 48-11-1850, 48-11-1860, and 48-11-1880. The secure snap-on dock ensures a stable mechanical and electrical connection for reliable high-current power transfer.
- Tailored Heavy-Duty Wiring
Precision tinned copper wiring is available in 8AWG or 10AWG configurations to optimize conductivity for different cable lengths. This heavy-duty power harness utilizes a thicker gauge for the 2FT version to maximize starting torque and a flexible gauge for the 6FT version for extended reach.
- Advanced Safety Clamping
High-pressure insulated alligator clamps feature reinforced springs and 1mm thick copper sheets to maintain a rock-solid grip on battery terminals. This safety-engineered jumper system prevents accidental short circuits and current leakage while protecting the operator from electrical shock.
- Extreme Temperature Resilience
Premium silicone insulation maintains superior flexibility and structural integrity in temperatures ranging from -60°C to 200°C. This all-weather battery connector will not become brittle in freezing winter rescues or melt during high-demand engine starts in the summer.
- Multi-Scenario Off-Grid Power
The versatile energy converter transforms standard workshop batteries into a portable jump starter or a 12V source for camping lights and golf carts. This cordless battery adapter provides total independence for digital nomads, outdoor enthusiasts, and emergency roadside situations.
IMPORTANT USAGE NOTE
This high-current adapter is designed for Emergency Car Jump Starting and heavy-duty 12V equipment. Because it provides direct 20V output from the tool battery, please DO NOT leave the clamps connected to the vehicle for more than 30 seconds after the engine starts. This ensures the safety of your vehicle’s electrical system and the tool battery’s longevity.
MWK+WD100-1 Milwaukee M18 Battery Adapter with Jumper Cables Datasheet
| Part NO | MWK+WD100-1-2ft | MWK+WD100-1-6ft |
| Cable Length | 2 Feet (60 cm) | 6 Feet (180 cm) |
| Wire Gauge | 8 AWG (Thicker) | 10 AWG (More Flexible) |
| Wire Material | Tinned Copper (Anti-Oxidation) | Tinned Copper (Anti-Oxidation) |
| Max Current | 100 Amps | 100 Amps |
| Insulation | High-Flex Silicone (-60°C to 200°C) | High-Flex Silicone (-60°C to 200°C) |
| Compatibility | Milwaukee M18 / M18 Fuel Series | Milwaukee M18 / M18 Fuel Series |
| Clamp Type | 1mm Thick Copper Insulated Clamps | 1mm Thick Copper Insulated Clamps |
If you have any questions about the product or would like more information, we encourage you to contact us via email at sales1@chinadaier.com or through our live chat. We are here to help you and give you the information you need.
