Guards & Covers for Panel Switches
تبديل الملحقات
DAIER supplies guards and protective covers for toggle, rocker and push button switches. Choose flip guards to help prevent accidental operation, or matching covers and rubber boots to help protect switch actuators from dust and moisture. Fit depends on the switch shape, dimensions and mounting arrangement.
- حدود المنتج Guards, Covers & Boots
- أنواع التبديل Toggle, Rocker & Push Button
- Push Button Fit 16, 19, 22 & 25 mm
- Rocker Cover Shapes Round, Square, Rectangle & Oval
منتجات ملحقات المفاتيح
غطاء حماية مفتاح التبديل الآمن SAC-01
غطاء حماية مفتاح التبديل الآمن سيتناسب مع مفاتيح التبديل القياسية ON/OFF و(ON) /OFF (SPST وDPST).
غطاء واقي لأزرار الضغط من سلسلة DPC بقياس 16-25 مم
غطاء زر الضغط مناسب لمفاتيح الضغط ذات الأبعاد 16 مم، 19 مم، 22 مم، 25 مم المصنوعة من البلاستيك واللون الأبيض الشفاف.
غطاء مفتاح هزاز مقاوم للماء من سلسلة WPC
غطاء مفتاح التأرجح لسلسلة مفاتيح التأرجح KCD مصنوع من السيليكون الشفاف وهو مقاوم للماء والغبار ويحمي مفاتيح التأرجح.
غطاء مفتاح تبديل مطاطي مقاوم للماء من سلسلة WPC
غطاء مطاطي لمفاتيح التبديل المصغرة من MTS ومفاتيح التبديل KN3C. قم بتركيب الغطاء المطاطي المتين المقاوم للعوامل الجوية لحماية جميع مفاتيح التبديل GB من الرطوبة والغبار.
دليل الاختيار
Choosing a Switch Guard or Cover
Start with the switch you need to protect, then compare these three items. A flip guard and a protective cover serve different purposes.
Switch Fit & Dimensions
Push button covers are listed for 16, 19, 22 and 25 mm switches. Rocker covers include round, square, rectangular and oval shapes. Match the switch drawing, actuator height and surrounding clearance; toggle boots also require the correct thread fit.
Mounting & Operation
The toggle flip guard is secured beneath the switch nut; rubber toggle boots screw onto the switch mounting thread. Check how the selected cover attaches and confirm that the actuator can complete its travel after installation.
غرض الحماية
Flip guards help prevent accidental toggle operation, while protective covers and boots help shield actuators from dust and moisture. Choose the construction for the operating environment and confirm any required sealing performance for the assembled switch and panel.
الاستخدامات
تطبيقات التبديل النموذجية
Match protection accessories to the controls in your panel or equipment assembly.
Guarded Toggle Controls
Use a compatible flip guard where the operator should open a lid before switching the control.
Exposed Panel Actuators
Choose a matching cover or boot when dust and moisture protection is needed around the actuator.
OEM & Replacement Parts
Match the switch drawing, thread, cover shape and installation clearance for a new assembly or replacement.
أسئلة شائعة
Switch Accessories FAQs
Answers about cover compatibility, mounting, protection and ordering.
The range includes toggle flip guards, protective push button covers, rocker switch covers and rubber toggle boots. Choose by switch type, fit and protection purpose.
Fit is specific to the switch dimensions and construction. Push button covers are listed for 16, 19, 22 and 25 mm sizes; rocker covers vary in shape and size. For toggles, check the thread and handle clearance against the drawing.
The guard mounts beneath the switch nut. Its spring mechanism holds the lid open or closed. On the compatible ON/OFF toggle described in the product page, closing the lid returns the switch to OFF; verify the handle fit and action for your assembly.
The covers are described as helping protect against dust and moisture, but the listed accessory pages do not state a tested IP rating for every switch-and-cover assembly. Send your required protection level and mounting drawing so the suitable construction and supporting specification can be reviewed.
Send the switch model or drawing, required guard or cover type, mounting dimensions and quantity. Include a photo for replacement parts and describe the operating environment or required protection level.
Discuss Your Switch Accessory Requirements
Send the switch model or drawing, required guard or cover type, mounting dimensions and quantity. Include a reference photo for replacement parts and describe the operating environment or protection requirement.
هل تفضل التواصل عبر البريد الإلكتروني؟ sales1@chinadaier.com